32” Schluter KERDI-LINE Linear Drain with Offset Outlet (KL1VO60E80)

32” Schluter KERDI-LINE Linear Drain with Offset Outlet (KL1VO60E80)

KERDI-LINE consists of a formed stainless steel channel body and grate assembly or covering support to which tile is applied. The channel body features a standard 2" (50 mm) no-hub outlet and is attached to the pipe using an appropriate mechanical (e.g., flexible or no-hub) coupling. The simple connection to standard drain outlets makes KERDI-LINE suitable for new construction and renovation. KERDI-LINE is available with both center and off-set outlets. The off-set outlet is located 8" (20.3 cm) from the edge of the channel body and provides flexibility when obstacles (e.g., floor joists) are encountered during installation. KERDILINE includes a corresponding polystyrene foam channel support to set the drain elevation to the corresponding KERDI-SHOWER-LT/-LTS shower trays. The perimeter of the channel body consists of a bonding flange laminated with a collar made of KERDI. It ensures a simple and secure connection to the bonded waterproofing assembly, both in the floor area and on adjacent walls. KERDI-LINE is available in channel lengths from 20" to 72" (50 cm to 180 cm) in 4" (10 cm) increments. The bonding flange extends approximately 1" (2.5 cm) beyond the channel on all sides.

KERDI-LINE CHANNEL BODY OFFSET 32"

Product Code: KL1VO60E80

You have selected the channel body.

This kit includes:

1 channel body with integrated KERDI collar

1 channel body support

1 no-hub coupling

4 inside and 2 outside KERDI-KERECK waterproofing corners

1 KERDI-SEAL-PS 3/4" pipe seal

1 KERDI-SEAL-MV 4-1/2" mixing valve seal

Don’t forget! The KERDI-LINE grate kit must be selected separately.

MSRP $432.32 – Asking $300 Firm

https://www.schluter.ca/schluter-ca/en_CA/Shower-System/Drains/Shower-Dr...

Note: No grate is included and will have to be purchased separately

Photos: